piel.tools.gdsfactory.patch

Module Contents

Functions

straight_heater_metal_simple(...)

Returns a thermal phase shifter that has properly fixed electrical connectivity to extract a suitable electrical netlist and models.

straight_heater_metal_simple(length: float = 320.0, length_straight_input: float = 15.0, heater_width: float = 2.5, cross_section_heater: gdsfactory.typings.CrossSectionSpec = 'heater_metal', cross_section_waveguide_heater: gdsfactory.typings.CrossSectionSpec = 'strip_heater_metal', via_stack: gdsfactory.typings.ComponentSpec | None = 'via_stack_heater_mtop', port_orientation1: int | None = None, port_orientation2: int | None = None, heater_taper_length: float | None = 5.0, ohms_per_square: float | None = None, **kwargs) → gdsfactory.component.Component

Returns a thermal phase shifter that has properly fixed electrical connectivity to extract a suitable electrical netlist and models. dimensions from https://doi.org/10.1364/OE.27.010456 :param length: of the waveguide. :param length_undercut_spacing: from undercut regions. :param length_undercut: length of each undercut section. :param length_straight_input: from input port to where trenches start. :param heater_width: in um. :param cross_section_heater: for heated sections. heater metal only. :param cross_section_waveguide_heater: for heated sections. :param cross_section_heater_undercut: for heated sections with undercut. :param with_undercut: isolation trenches for higher efficiency. :param via_stack: via stack. :param port_orientation1: left via stack port orientation. :param port_orientation2: right via stack port orientation. :param heater_taper_length: minimizes current concentrations from heater to via_stack. :param ohms_per_square: to calculate resistance. :param cross_section: for waveguide ports. :param kwargs: cross_section common settings.